亚洲1卡二卡3卡4卡新区在线,亚洲AV成人无码网天堂,亚洲一区精品动态图成年视频,日韩国产中文字幕黄色,又爆又大又粗又硬又黄,一级a性色生活久久无码,亚洲中文字幕电影不卡电影

Introduction of standard operation method of NC lathe by NC lathe manufacturer

1. the protective door must be closed before the spindle starts cutting. It is forbidden to open the protective door during the normal operation of the program.

2. after the power is turned on each time, the operation of returning to the reference point of each axis must be completed first, and then enter other operation modes to ensure the correctness of the coordinates of each axis.

3. it is not allowed to open the door of the electrical cabinet during normal operation of the machine tool.

4. the processing program can only be operated after strict inspection.

5. during manual tool setting, pay attention to selecting the appropriate feed speed; When changing the tool manually, the tool holder shall have enough transposition distance from the workpiece to avoid collision.

6. in case of abnormal crisis during processing, press the "emergency stop" button to ensure the safety of personnel and equipment.

7. it is not allowed to use compressed air to clean the machine tool, electrical cabinet and NC unit.

8. during work, check whether you wear work clothes, safety shoes, safety helmets and safety glasses. It is not allowed to wear gloves to operate CNC machine tools, or tie a tie.

9. before start-up, check that all parts and mechanisms of the CNC machine tool are in good condition and all buttons can be reset automatically. Before starting the machine, the operator shall add oil to the relevant parts according to the provisions of the machine tool operation manual, and check the oil level and oil quantity.

10. no obstacles shall be placed around the CNC machine tool, and the working space shall be large enough.

11. turn off the power supply of the machine tool before replacing the fuse. Do not touch the motor, transformer, control board and other occasions with high-voltage power supply.

12. generally, two people are not allowed to operate the machine tool at the same time. However, if two or more people are required to complete a certain work together, they should pay attention to coordinating their actions.

13. be familiar with the operating instructions of the CNC machine tool before operating the machine. The startup and shutdown sequence of the CNC lathe must be operated in accordance with the instructions of the machine tool.